Pre-Built Demonstration Unit
We have manufactured our first Pre-Built unit as a test of our design method and manufacturing procedure. It was an overall success and has also given us some experience in how to further refine our design for future units. We road tested the unit at high speed with no wind damage. Also, the unit has been subjected to some very severe Nebraska weather with high winds and heavy rain with no leakage.The unit has the following specifications and features:
Size: 8’W x 18’L x 8’H
Roof Type: 1/2:12 Pitch Single Slope
Exterior Siding & Roofing: 26 Ga. Painted Steel
Wall and Roof Insulation: Continuous 3” Rigid (R-20)
Floor Insulation: 5” Fiberglass Batt & Continuous 2” Rigid (R-28 Total)
Interior Finish: White Painted Flat Steel with Exposed Gray Painted Steel Framing
Floor: 3/16” Steel Checkerplate (150 PSF Capacity)
Features:
- 1 Ea. 3’W x 7’H Personnel Door
- 1 Ea. 2 Ton Bard HVAC Unit
- 1 Ea. 24” Square Aluminum Louver / Damper
- Crane Liftable
Electrical:
- 100 Amp Single Phase Main Panel
- 3 Ea. Fluorescent Fixtures
- Convenience Outlets
- Exterior Disconnect
Base Floor / Skid Shown Upside Down - Corrugated Protective Steel Sheeting over Rigid and Batt Insulation
Partially Assembled Unit showing 3” Rigid Continuous Insulation in Walls and Roof
Finished Unit After Road Testing at High Speed
Finished Interior Photos
Finished Exterior Photo